10633 N Indianola Road
Whitewater, KS 67154
(316)799-2782
Manufacturing Quality Fencing Products
Home Continuous Fence Gates Horse Stalls Consulting Service Policies
|
Manufacturing Quality Fencing Products Home Continuous Fence Gates Horse Stalls Consulting Service Policies
|
|
There are only four parts plus the posts, which make up this fence. The
panel is open-ended to accept the splice, which simply slides into the ends of the panel
rails. The fence clips secure the panels to the posts. The termination Posts are supplied by the customer. A variety of post materials can be used. We recommend heavy 2.875" OD pipe (such as used oil field pipe) or 4" CCA treated wood posts. With pipe posts, the fence clip will be welded to the post. With wood posts, the fence clip is secured with ring shank nails or screws. Post spacing can vary from 8’ to 12’ depending on livestock, traffic, and fence duty. We also suggest all posts be set in concrete.
You will find that Dry Creek Continuous Fence is easily and quickly installed. Major savings in installation labor costs can be realized with our fence. The use of all new materials eliminates any possibility of pre-existing corrosives and allows you to expect decades of dependable service. By using Dry Creek Continuous Fence, you will have a strong, attractive, permanent fence.
|
|
North Dakota Facility (701) 682-5194 (701) 682-5217 Home Continuous Fence Gates Horse Stalls
|
Continuous fence is a welded steel
component type, permanent fencing. It is manufactured in 20 foot panels, which are spliced
together and secured to set post. The accompanying drawing very aptly illustrates the
fence assembly.
assembly is used at the beginning and end of each fence run to put a finished edge to the
fence. Fence corners are assembled by heating and bending splices to the appropriate
angle.